http://www.precisionenginetech.com/tech-explained/2009/06/02/cnc-machining-an-engine-block-part-1/ The Engine Specialist's Technical & Performance Resource Wed, 01 Feb 2012 14:11:00 +0000 hourly 1 http://wordpress.org/?v=3.1.2 http://www.precisionenginetech.com/tech-explained/2009/06/02/cnc-machining-an-engine-block-part-1/comment-page-1/#comment-24 mike.mavrigian Fri, 04 Dec 2009 22:24:46 +0000 http://www.precisionenginetech.com/?p=1478#comment-24 Check with Scott Gressman at Gressman Powersports. He has an RMC CNC machine with accurizing specs in his software. Maybe he can turn you on to a source. Scott is at 419-355-8980. His shop is in Fremont, OH Check with Scott Gressman at Gressman Powersports. He has an RMC CNC machine with accurizing specs in his software. Maybe he can turn you on to a source. Scott is at 419-355-8980. His shop is in Fremont, OH

]]> http://www.precisionenginetech.com/tech-explained/2009/06/02/cnc-machining-an-engine-block-part-1/comment-page-1/#comment-96 Gene L. Dettmer Thu, 05 Nov 2009 15:58:32 +0000 http://www.precisionenginetech.com/?p=1478#comment-96 Hi, I have been looking for information on macining a 350 S.B. I have not yet found any one that can supply me with blueprints. I used to program and opperate a CNC machining center when I work for John Deere here in Waterloo. I now own a small macine shop. I'am looking for some one I can get a block casting from. And want to machine my own Chevy S.B. I know this may seem a little NUTS, But any help would be great. Hi, I have been looking for information on macining a 350 S.B. I have not yet found any one that can supply me with blueprints. I used to program and opperate a CNC machining center when I work for John Deere here in Waterloo. I now own a small macine shop. I'am looking for some one I can get a block casting from. And want to machine my own Chevy S.B. I know this may seem a little NUTS, But any help would be great.

]]> http://www.precisionenginetech.com/tech-explained/2009/06/02/cnc-machining-an-engine-block-part-1/comment-page-1/#comment-14 Gene L. Dettmer Thu, 05 Nov 2009 07:58:32 +0000 http://www.precisionenginetech.com/?p=1478#comment-14 Hi, I have been looking for information on macining a 350 S.B. I have not yet found any one that can supply me with blueprints. I used to program and opperate a CNC machining center when I work for John Deere here in Waterloo. I now own a small macine shop. I'am looking for some one I can get a block casting from. And want to machine my own Chevy S.B. I know this may seem a little NUTS, But any help would be great. Hi, I have been looking for information on macining a 350 S.B. I have not yet found any one that can supply me with blueprints. I used to program and opperate a CNC machining center when I work for John Deere here in Waterloo. I now own a small macine shop. I'am looking for some one I can get a block casting from. And want to machine my own Chevy S.B. I know this may seem a little NUTS, But any help would be great.

]]>