by Mike Mavrigian Build/assembly and all photos by author Our Lunati roller cam features 0.544″ valve lift at intake and 0.560″ at exhaust, with duration of 232 intake and 242 exhaust. Centerline is 108 intake and 116 exhaust. CAMSHAFT AND TIMING Dart thoughtfully provided anti-friction-coated cam bearings with their block. Each bearing is [...]
One of the newest releases from HP Books is High Performance Fasteners & Plumbing, written by Mike Mavrigian. This 170-page book provides detailed, yet easy-to-read technical information on understanding all types of performance fasteners (bolts, nuts, screws, rivets, clamps, etc.) and performance plumbing for fuel, brake, oil and coolant hose, fittings, tubes, etc.
continued from Part 1 CYCLIC FATIGUE PROTECTION Whether measured by stretch or tightened by torque, rod bolts MUST be installed with the proper amount of preload (bolt stretch) in order to provide proper clamping force. If a rod bolt is installed without sufficient preload, every revolution of the crankshaft will cause a separation between the [...]
MEASURING CONNECTING ROD BOLT STRETCH Optimum bolt preload and clamping force is achieved by monitoring rod bolt stretch as opposed to applying torque value. by Mike Mavrigian photos by author Tightening connecting rod bolts while measuring bolt stretch provides a much more accurate method of achieving proper bolt preload and clamping force. Professional performance and [...]
PISTON/ROD INSTALLATION With the cylinder bores wiped clean with a lint-free towel, apply a light coat of engine oil to the walls. After making sure that the connecting rod and cap saddles are clean and dry, install the rod bearings to the rod and cap and coat the exposed bearing surfaces with oil (I used [...]
The side relief design provides additional clearance for the crank’s reluctor wheel. Without this added clearance, No. 8 piston would hit the reluctor wheel. Here’s an underside view that clearly illustrates the side relief/short pin design. Naturally, this also reduces reciprocating weight as a bonus. As you can see, the compression height resulted in the [...]
Subscribe to Precision Engine
Sign up for our E-newsletter