Subscribe to Precision Engine
Sign up for our E-newsletterFor 2011, I’ve decided to produce two new engine projects, each of which will provide handy and informative tips for our readers. Naturally, each build will be presented in our normal manner…as a multi-part series of technical articles. The new projects for this year include a Pontiac 455 and a “Budget LS” build.
Tag: PROJECT ENGINES
DECISIONS, DECISIONS: WHICH ENGINE IS NEXT?
Posted By Mike Mavrigian,
December 14, 2010 ·
View Comments
We’ve done a handful of project engines. What should we choose as the focal point of our next build? by Mike Mavrigian Ever since I asked our readers for their suggestions regarding our next engine build project, the response has been overwhelming. The suggestions have included a hi-po build of a Ford 4.6L [...]
PROJECT FLATHEAD, PART 5
Posted By Mike Mavrigian,
November 20, 2010 ·
Comments Off
Build, text and photos by Mike Mavrigian It’s time to talk about the fuel system on our little 8BA. I chose a triple-deuce setup, using three Barry Grant Demon 98 2-bbl carbs. The center-mounted carb serves as the primary carburetor (P/N 9801), and the front and rear carbs serve as secondaries (P/N 9802). The [...]
PROJECT FLATHEAD, PART 3
Posted By Mike Mavrigian,
September 28, 2010 ·
View Comments
I’ve decided to have the water pumps and pulleys polished and chrome plated. This will provide additional visual appeal. Engine build, text and photos by Mike Mavrigian In this series installment, I’ll discuss final installation of the rods and pistons, the oil pump and pan, timing cover, water pumps and cylinder heads.
PROJECT FLATHEAD, PART 1
Posted By Mike Mavrigian,
August 12, 2010 ·
View Comments
Our flattie is almost finished. Compared to an original, she’s looking pretty snazzy. Build, text and photos by Mike Mavrigian The Ford flathead was a popular platform for early rodders, and basically started the hot rod and performance engine movement. The engine production ran from 1937 through 1953, with one of the most popular versions [...]
DART 427W PART 5
Posted By Mike Mavrigian,
April 9, 2010 ·
View Comments
Our build is done. See the end of this article for several tasty photos of the finished engine, followed by a complete list of the participating manufacturers. FINAL ASSEMBLY OF OUR NASTY LITTLE DART 427W OUR ONE TRICK PONY IS DONE. WE’RE READY FOR THE DYNO RUN. Engine build, text and photos by Mike [...]
BIRCHWOOD OFFERS SPECIALTY SERVICES
Posted By Mike Mavrigian,
March 1, 2010 ·
View Comments
Birchwood Automotive Group (operated by Precision Engine editor Mike Mavrigian) now offers its services to both manufacturers and engine build shops, including technical writing, product and installation studio photography, custom engine preparation for display purposes, special corporate project vehicle builds, design, transport and more. The firm has prepared a number of engines as well as completed [...]
PROJECT FORD FE, PART 4
Posted By Mike Mavrigian,
September 17, 2009 ·
View Comments
Text and photos by Mike Mavrigian PROJECT FORD FE, PART 4 The oil filter base (located on the forward left side of the block) features two ports and four bolt holes. A base gasket must be used for sealing between the adapter and the block. This gasket bwas included in our Victor gasket set.The gasket [...]