Ross Racing Engines’ Tony Lombardi cut the valve reliefs using an end mill and his adjustable piston vise. Build, text and photos by Mike Mavrigian The Pontiac bigblock build (starting with a 455 block and boring/stroking to 501 CID) is progressing. I apologize for the time delay, but this build has been [...]
This installment in our LS 5.3L “retro build” covers installation of our hydraulic roller lifters, cylinder heads, pushrods and rocker arms, completing the valvetrain. . Build, text and photos by Mike Mavrigian . CYLINDER HEADS While there’s nothing to complain about with the original casting number 862 aluminum heads (GM P/N 12559862), making them flow [...]
Build, text and photos by Mike Mavrigian . I realize it’s been a while since my last posting of this project’s Part 1 article, but I’ve been tied up with multiple projects at the same time. Since the Part 1 article, I’ve obtained the crankshaft, had the heads finish-machined and assembled [...]
WE BEGIN THE BUILD OF A BORED STROKED PONTIAC 455 TO OBTAIN 501 CID AND ABOUT 600 PONIES. THE GOAL:TO CREATE AN IDEAL “INDIAN” POWERPLANT FOR STREET, STRIP AND STREET RODDER APPLICATIONS Prior to block machining, the block exterior was smoothed and detailed. Not only will this ressurected Pontiac provide some ground-pounding thump, but it’ll [...]
WE BUILD AN LS ENGINE ON A BUDGET AND TRANSFORM THE MODERN ENGINE INTO A RETRO MOTOR THAT HARKS BACK TO THE GOOD OLD DAYS IN THE PROCESS. BASICALLY, WE’RE BUILDING A CARBURETED 327 CID LS ENGINE, WITH CUSTOM TOUCHES THAT REMIND US OF AN EARLY 1960′S SMALLBLOCK CHEVY We started with an [...]
One of the newest releases from HP Books is High Performance Fasteners & Plumbing, written by Mike Mavrigian. This 170-page book provides detailed, yet easy-to-read technical information on understanding all types of performance fasteners (bolts, nuts, screws, rivets, clamps, etc.) and performance plumbing for fuel, brake, oil and coolant hose, fittings, tubes, etc.
Subscribe to Precision Engine
Sign up for our E-newsletter