The side relief design provides additional clearance for the crank’s reluctor wheel. Without this added clearance, No. 8 piston would hit the reluctor wheel. Here’s an underside view that clearly illustrates the side relief/short pin design. Naturally, this also reduces reciprocating weight as a bonus. As you can see, the compression height resulted in the [...]
The upper intake manifold plenum box gasket is stainless-steel reinforced and provided a perfect fit. The upper plenum box is secured with 1/4″ x 20 x 3/4″ stainless socket head cap screws. I applied a dab of moly to the threads prior to installation. I tightened all screws to 60 in-lbs using a criss-cross pattern. [...]
WATER PUMP Installing the Meziere Enterprises electric water pump P/N wp300 was a breeze. With gaskets lightly coated with UltraCopper RTV, I snugged the four ARP 3/8″ x 16 x 1.250″ stainless bolts to a specified value of 25 ft-lbs (Meziere supplies socket head cap screws, but I opted for the ARP polished stainless just [...]
632 Part 5: THE ASSEMBLY CONTINUES by Mike Mavrigian photos by author In this article installment, we deal with a few minor challenges during the final fitting phase, but nothing too daunting. The details are provided here PUSHRODS In order to handle the demands of this engine, I ordered a set of extra-beefy custom pushrods [...]
Dart 11-Degree Big Chief Cylinder Head Specs P/N………………………18500000 Material…………………355T6 aluminum alloy Comb. Chambers……….56cc (70cc also available) Intake valve dia…………2.470″ Intake port dim. …………1.815″ x 2.725″ w/3/4″ radius Intake port volume………FP CNC – 497cc Intake port location……..Raised 1.500″ spread ports Exhaust valve dia………1.800″ Exhaust port volume……185cc Exhaust port dim………..2.020″w x 1.780″h Exhaust port location……angled & raised [...]
Subscribe to Precision Engine
Sign up for our E-newsletter